2023金叉买入起涨 拉升火力全开《通达信+指标+公式+副图+源码》

副图公式源码支持 手机/电脑

N:=9;M1:=3;M2:=3;
RSV1:=(CLOSE-LLV(LOW,N))/(HHV(HIGH,N)-LLV(LOW,N))*100;
K1:=SMA(RSV1,M1,1);
D1:=SMA(K1,M2,1);
J1:=3*K1-2*D1;
GUP1:=KDJ.K>KDJ.D AND KDJ.J>KDJ.D AND KDJ.J>KDJ;
GUP2:=CAPITAL*C/1000000;
GUP3:=(C-REF(C,1))/REF(C,1)*100;
GUA0:=NOT(NAMELIKE('ST') OR NAMELIKE('*ST') OR NAMELIKE('S') OR DYNAINFO(4)=0  OR INBLOCK('创业板') OR INBLOCK('科创板')) OR BARSCOUNT(C)>1;
GUA1:=GUP2>0 AND GUP2<80;
GUA2:=GUP3>9.8 AND GUP3<10.99 AND C=H;
GUA3:=C>2 AND C<22;
GUA4:=COUNT(GUA2,2)=1;
GUC1:=GUP1 AND GUA0 AND GUA1 AND GUA2 AND GUA3 AND GUA4;
STICKLINE(GUC1,C,O,0.3,0),COLOR0000FF;
DRAWTEXT(GUC1,L*0.99,'起涨'),COLOR0000FF;
MA1:MA(CLOSE,5);
MA3:MA(CLOSE,20);
GUB1:=(C/REF(C,1)-1)*100;
GUB2:=(O/REF(C,1)-1)*100;
GUB3:=DYNAINFO(15)/O/100;
GUB4:=GUB3/REF(V,1)*100;
GUB5:=(EMA(O,20)-REF(EMA(O,20),1))/REF(EMA(O,20),1)*100;
GUB6:=REF(L,BARSLAST(CROSS(GUB5,0)));
GUB7:=(O-GUB6)/GUB6*100;
GUB8:=CODELIKE('60') OR CODELIKE('00');
GUB9:=(C/REF(C,1)-1)*100>9.8 AND H=C;
GUB10:=COUNT(GUB9,4)<3;
GUC2:=GUB7<=20 AND REF(GUB1>9.80,1)  AND GUB2>=2 AND GUB2<=7.5 AND GUB8 AND GUB10;
STICKLINE(GUC2,C,O,0.3,0),COLORMAGENTA;
DRAWTEXT(GUC2,L*0.99,'拉升'),COLORMAGENTA;

选股公式源码



{选股公式一：起涨}
N:=9;M1:=3;M2:=3;
RSV1:=(CLOSE-LLV(LOW,N))/(HHV(HIGH,N)-LLV(LOW,N))*100;
K1:=SMA(RSV1,M1,1);
D1:=SMA(K1,M2,1);
J1:=3*K1-2*D1;
GUP1:=KDJ.K>KDJ.D AND KDJ.J>KDJ.D AND KDJ.J>KDJ;
GUP2:=CAPITAL*C/1000000;
GUP3:=(C-REF(C,1))/REF(C,1)*100;
GUA0:=NOT(NAMELIKE('ST') OR NAMELIKE('*ST') OR NAMELIKE('S') OR DYNAINFO(4)=0  OR INBLOCK('创业板') OR INBLOCK('科创板')) OR BARSCOUNT(C)>1;
GUA1:=GUP2>0 AND GUP2<80;
GUA2:=GUP3>9.8 AND GUP3<10.99 AND C=H;
GUA3:=C>2 AND C<22;
GUA4:=COUNT(GUA2,2)=1;
GUC1:=GUP1 AND GUA0 AND GUA1 AND GUA2 AND GUA3 AND GUA4;
起涨:GUC1;
{选股公式二：拉升}
GUB1:=(C/REF(C,1)-1)*100;
GUB2:=(O/REF(C,1)-1)*100;
GUB3:=DYNAINFO(15)/O/100;
GUB4:=GUB3/REF(V,1)*100;
GUB5:=(EMA(O,20)-REF(EMA(O,20),1))/REF(EMA(O,20),1)*100;
GUB6:=REF(L,BARSLAST(CROSS(GUB5,0)));
GUB7:=(O-GUB6)/GUB6*100;
GUB8:=CODELIKE('60') OR CODELIKE('00');
GUB9:=(C/REF(C,1)-1)*100>9.8 AND H=C;
GUB10:=COUNT(GUB9,4)<3;
GUC2:=GUB7<=20 AND REF(GUB1>9.80,1)  AND GUB2>=2 AND GUB2<=7.5 AND GUB8 AND GUB10;
拉升:GUC2;